RS-24 Rotator Switch 2x4 - Hamplus

“RS-44 Rotator Switch 4×4” has been added to your cart. View cart

RS-24 Rotator Switch 2×4

RS-24 Rotator Switch 2x4

RS-24 Rotator Switch 2x4 - Image 2

RS-24 Rotator Switch 2x4 - Image 3

Additional information

Additional information

Rotator Switch 2×4 If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-24 is the solution. With it you will use only one controller on the table and it will be able to control till four antenna rotators.

The RS-24 can select between four rotators using only one controller for each shack.
The system can use till two controllers.
One interlock system don’t permit connections for rotators in use on other shack.
It is possible to automate all station.
On systems where the Hamplus MBD-8E / F or MBD-12F is installed, the rotator assigned to each antenna are called on each change.
The RS-24 comutates eight wires.

Specifications:

Size:	24,5 cm width, 7cm height and 25,5cm deep
Power suply :	14 volts
Max. switch current:	8 amp.
Switching:	8 Wires

On the follow drawings we are use the YAESU G2800-DXA, but can be used any rotator and controller model. Wiring diagram exemples:

Two radios and four rotors

Downloads: RS-24 Connectors Pin Indetification

No data was found

Category: Rotator Switches

$519.00

In stock

Simplify antenna control with the RS-24 Rotator Switch. Manage up to four rotators with one controller, ensuring efficiency and automation in your shack.

Add to wish list

Reviews

Description
Reviews (0)

Description

Rotator Switch 2×4

If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-24 is the solution. With it you will use only one controller on the table and it will be able to control till four antenna rotators.

The RS-24 can select between four rotators using only one controller for each shack.
The system can use till two controllers.
One interlock system don’t permit connections for rotators in use on other shack.
It is possible to automate all station.
On systems where the Hamplus MBD-8E / F or MBD-12F is installed, the rotator assigned to each antenna are called on each change.
The RS-24 comutates eight wires.

Specifications:

Size:	24,5 cm width, 7cm height and 25,5cm deep
Power suply :	14 volts
Max. switch current:	8 amp.
Switching:	8 Wires

On the follow drawings we are use the YAESU G2800-DXA, but can be used any rotator and controller model.

Wiring diagram exemples:

Two radios and four rotors

Downloads: RS-24 Connectors Pin Indetification

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product categories

related products

ASR-21 Antenna and Rotator Switch

Antenna and Rotator Switch with 2 inputs by one output remotely controlled.
Coaxial connectors UHF type (SO-239) and DB-9 for rotators.
Used to expand 8 to 16 antennas and 4 to 8 rotators.
The ASR-21 comutates four wires.

$180.60

RS-28 Rotator Switch 2×8

If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, the Rotator Switch RS-28 is the solution. With it you will use only one controller on the table and it will be able to control till eight antenna rotators.

The RS-28 can select between eight rotators using only one controller for each shack.
The system can use till two controllers.
One interlock system don’t permit connections for rotators in use on other shack.
It is possible to automate all station.
On systems where the Hamplus MBD-12F is installed, the rotator assigned to each antenna are called on each change.
The RS-28 comutates eight wires.

$862.00

RS-44 Rotator Switch 4×4

If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-44 is the solution. With it you will use only one controller on the table and it will be able to control till four antenna rotators.

$937.00

RS-48 Rotator Switch 4×8

If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-48 is the solution. With it you will use only one controller on the table and it will be able to control till eight antenna rotators.The RS-48 can select between eight rotators using only one controller for each shack. The system can use till four controllers. One interlock system don’t permit connections for rotators in use on other shack. It is possible to automate all station. On systems where the Hamplus MBD-12F is installed, the rotator assigned to each antenna are called on each change. The RS-48 comutates eight wires.

$1699.00

Got any idea about our products?

We would glad to know. Send us an e-mail:

Hamplus was founded in the beginning of 2008 by two Hamradio operators, Celso PP5CFS and Marcus PP5MS, both with wide experience (more than 35 years) in digital, electronics, R.F. and digital logics.

Rua Joe Collaço, 954,
Florianópolis, SC – Brasil
Zip code: 88035-200
Support +55 (48) 999723967
Sales +55 (48) 999722575
Email: hamplus@hamplus.com
For US residents: www.dxengineering.com

Hamplus © 2025. Todos os direitos reservados. Desenvolvido por Splendor.io