HOME | PRODUCTS | WHO USES | PRICES | ABOUT US | CONTACT |
Antenna Switch

  • Antenna Switch with 6 inputs by two output remotely controlled.
  • Aluminum cabinet painted in black color, having UHF type (SO-239) for the R.F connections and DB-15 for remote control.
  • All antenna inputs are switched to ground when not in use.
  • When the power are switched off, all antenna inputs are routed to ground for protection purposes.


Specification:

Size:

Width 35,5cm - Height 4,5cm - Deep 18cm

Power Supply:

D.C. 14 Volts + or - 20% drain about 100mA

Max. SSB power allowed:

4000 Watts P.E.P. with S.W.R. equal or less than 1.8:1

Frequency of operation:
D.C. to 60MHz
Time delay to switch:
Equal or less than 50ms (exchange forbidden during TX)
Insertion loss:
Equal or less than 0,1dB

Port Isolation worst conditions measurements:

Wiring diagram exemples:

Connection diagram for two radios and six antennas.


Connection diagram for two radios, six antennas and band pass filter.




Downloads:  
Connectors Pin Identification  

 

 

More Hamplus:

Copyright Hamplus .